Results 1 to 10 of 21
-
Verified Tsikot Member
- Join Date
- Mar 2006
- Posts
- 106
March 11th, 2009 05:10 AM #1Hi guys,
Ano kaya ang problem ng gulong ko, sabay sabay binili yung 4 na gulong ko and yung isa mabilis bumaba ang hangin compared dun sa 3. Nirotate ko na sha sa iba ibang position para malaman ko kung gulong ba talaga yung problema and siya lang talaga ang mabilis maubos ang hangin, bakit po kaya?
Hindi naman sha nafa-flat, parang mabilis lang talaga bumaba like 3 days pa lang from 32 nagiging 24-25 na sha samantalang yung 3 gulong ko nasa 31 lang ganun.
Ano po ba ang dapat kong gawin?
Thanks in advance
-
March 11th, 2009 08:18 AM #2
Since you rotated your tyres (rims in the same positions, right?) and it's still the same tyre, then there must be a microcrack on it. Have it thoroughly checked in a vulcanizing shop. You should be able to find what's the problem in it....
Anyway, have the offending rim and/or tyre checked thoroughly.
7606:mobile1:
-
March 11th, 2009 08:23 AM #3
old school lublob-tubig habang may nakakabt na compressor ng hangin technique should do the trick.
-
March 11th, 2009 09:03 AM #4
Na vulcanize na ba tong tire na to dati?
baka yung patch natanggal or natuklap.
-
DIY to death!
- Join Date
- Jan 2003
- Posts
- 451
-
March 11th, 2009 10:59 AM #6
-
-
-
-
Verified Tsikot Member
- Join Date
- Jul 2008
- Posts
- 176
March 11th, 2009 02:18 PM #103 sources ng air leak:
1. most obvious would be a puncture in the tire.
2. defective air valve (pito) minsan yung pito mismo ang sira pero pwede din kasi mag leak dun sa base ng pito kung saan ito nakakabit sa mags.
3. tire bead is not seated properly.
most vulcanizing shops can remedy these easily. pa check mo na lang paps.
Discover the ultimate in relaxed romance with the best casual dating platform! Authentic Ladies ...
Exemplary Сasual Dating - Verified Damsels