Low profile wheels for Mazda Tribute..

**tribby** · June 23rd, 2004 03:58 PM

Wow maraming salamat sa mga reply..

Just to settle this question though, is there a shop i can go to that can help fit a wheel and tire to find out whether it will actually fit the wheel well? Is there a place that will actually put on tires and wheels to test? :confused:

**kimpOy** · June 23rd, 2004 04:03 PM

jon di ba dapat amy sidewall bulge kasi 9.5 and rims niya?

**Ungas** · June 23rd, 2004 04:13 PM

Maliit lang discrepancy nila 0.25" on either side of the rim. Di gano halata lalo na pag nahanginan pa ng matigas.

Most tire/mags shops offer free fitting on one corner to check for fender scrubbing. Kaso sinisilip lang nila while the vehicle is in normal compression.

**tribby** · June 23rd, 2004 04:37 PM

Just called the number in the concept one website and for all Tributes out there the wheel specs are:

5 holes, PCD=114, offset=40 or 45.

Problem is that they dont have a lot of 18" mags with these specs in stock.:dead:

**tribby** · June 23rd, 2004 05:34 PM

I did a search in the forums and it seems that rota mags might be a good option as well..

I tried inquiring but it seems that the wheels they have are 18x7.5 or 8 :dead: which is a bit smaller than the ones in concept one.

Sorry to raise the question again but can 255 width tires (255mm = approx. 10") fit in a 7.5" wheel?

**kimpOy** · June 23rd, 2004 05:43 PM

yes kasya pa rin yan.

**kewlryds** · June 23rd, 2004 07:03 PM

**tribby** · June 23rd, 2004 07:36 PM

thanks kewlryds! parang ganyan yung tinitignan ko na rota mags..its the same style and i think its in chrome also..(model is called style 5)

i think the one in the picture is also in 18s..tama ba?