Results 2,791 to 2,800 of 2820
-
February 27th, 2010 10:41 AM #2791
Thanks sir benchph1!
You're right, there's a very small leak on the powersteering fluid hose. Naka-schedule na nga for replacement with kia alabang, sabi ko sa kanila sabay ko na din sa 45k na maintenance nya.
Whew. What a relief. I was praying it wasn't an oil pump chain problem.
Badtrip, sabay-sabay ang problems. Kahapon when I entered my Sedona, hinila ko yung door knob na sliding to put in my bag, naputol yung parang screw na naghohold sa side na malapit sa driver's door, yung pivot na part para mahila yung lock. Waaaah! To fix this, do I have to replace the whole assembly? Gusto ko na lang sang lagyan ng metal from one of my son's toys tapos superglue ko e... kaya lang di ako marunong magbukas nung door panel.
-
February 27th, 2010 12:04 PM #2792
praetor,
i cant imagine what you talking about. care to post a pic?
-
February 27th, 2010 07:18 PM #2793
bench, it's the pivot pin that the handle attaches to.
praetor, since you're going to the casa anyway, have them do it na. it's relatively simple for them to install that pin.
my passengers have already broken the pivot pins on both of my sliding doors before. i had one done by a banaue boy who fabbed up a pin with wire (alambre, the stiff type). when the other pivot pin was damaged, i had a repair shop in baguio do it. no parts bought on both occasions, labor charges only.
-
Verified Tsikot Member
- Join Date
- Feb 2010
- Posts
- 152
March 1st, 2010 12:17 PM #2794Hi to everyone:
My front and rear shock absorber needs to be replaced. Any recommendation from the experts? Please include the price estimate of the recommended shocks. Mine is a Carnival 2000 model. Thanks.
-
Verified Tsikot Member
- Join Date
- Feb 2010
- Posts
- 152
March 1st, 2010 12:29 PM #2795
-
Verified Tsikot Member
- Join Date
- Oct 2008
- Posts
- 35
March 1st, 2010 08:29 PM #2796*Joe Magarac
Perfect timing on your post, I just inquired goodgear on some suspension parts.
Hope below price quotation would help.
Shocks (gas type)
2,200 (front)
1,200 (rear)
Rack-end 420
Tie-Rod 320
Ball-joint (assembly) - 2,450
Strut bushing 50
-
Verified Tsikot Member
- Join Date
- Feb 2010
- Posts
- 152
-
Tsikot Member
- Join Date
- Dec 2009
- Posts
- 2
March 4th, 2010 08:26 PM #2798
-
Tsikot Member
- Join Date
- Dec 2009
- Posts
- 2
March 4th, 2010 08:32 PM #2799
-
March 6th, 2010 12:22 PM #2800
huh? are you referring to me bro?
my post is for praetor.
may bad experience ako sa mga gumagawa ng power steering hose sa tabi-tabi, sinubukan ko lang once. well to make it simple di nila na solve ang leak sa p/s system ng carnival ko dati.
wala namang kinalaman ang matigas na rubber hose sa leak, IMHO. kasi sa crimping usually nagkakaron ng tagas.