Results 2,051 to 2,060 of 2820
-
Verified Tsikot Member
- Join Date
- Dec 2007
- Posts
- 8
December 17th, 2007 07:28 PM #2051
-
December 18th, 2007 12:51 AM #2052
about the Hold light in your dash blinking, it could be an indicator that there's something wrong the transmission. ganyan ang indicator sa Honda AT's. magbiblink kapag nilagay mo sa drive. have it checked immediately.
Autozionplus,
saang casa ito? tamad diagnostics naman yang mga iyan. ayaw na siguro nilang magtroubleshoot para mapinpoint ang eksaktong piyesa na kelangang palitan. diesel fuel injectors rarely need replacement. calibration lang ang kailangan.
-
December 18th, 2007 08:59 PM #2053
-
Verified Tsikot Member
- Join Date
- Mar 2005
- Posts
- 233
December 19th, 2007 08:13 AM #2054
-
December 19th, 2007 09:23 AM #2055
great post, boquito! much thanks for the numbers of additional parts suppliers.
alan99, don't turn on the hold button when you are launching from a dead stop or if you are on an incline. the hold button makes the car launch from second gear only. best to put the transmission on D.
i personally use the hold button to nudge the A/T to shift up when i feel that the revs are already too high. i use the hold button on long uphills when i am on a good pace already - that is, to lessen the peaky revolutions caused by shifting gears. i use the hold button on long downhills so that the A/T will not go to final gear. personally, i prefer the 2 over hold on D.
ditto.
-
Verified Tsikot Member
- Join Date
- Oct 2007
- Posts
- 23
December 19th, 2007 10:05 AM #2056i have installed HID on my sedona 2002 manual tranny maganda maliwanag talaga i have it installed at carluck banawe matagal ko na siya suki owner type jeep pa lang gamit ko sa kanya na ko nagpapagawa of course pati ung parts sa kanya. importer siya ng HID as far as i know. if your interested try 4139340, 7425097. marami din siya mga quality accessories, alex name nung owner. i can assure you mura sa kanya.
-
Verified Tsikot Member
- Join Date
- Oct 2007
- Posts
- 23
December 19th, 2007 10:11 AM #2057
-
December 19th, 2007 12:10 PM #2058
Quick question po mga fellow carnival lover
i need to replace my valve cover gasket...ok na po ba yung replacement korea na lang or OEM kailangan ang problem po kase lahat ng store na tinawagan ko sa banawe puro replacement korea lang ang meron..salamat po
-
Verified Tsikot Member
- Join Date
- Mar 2005
- Posts
- 233
-
December 19th, 2007 07:11 PM #2060
Based on the comments of other posters a few pages back, I would recommend sticking with OEM parts, especially if they are plastic or rubber parts in mission-critical areas. May mga nag-feedback kasi na madali masira yung mga replacement Korean rubber parts, like this post by jabr.
Are they on track to surpass last year's sales?
Car Sales Data (2025)