Isuzu Hi-Lander owner's (Please participate for us to form a group)

**ben1031** · May 29th, 2011 10:12 PM

Originally Posted by blue_gambit

Anung RPM ba nag she-shake? baka mababa lang yung rpm kaya na she-shake...

Gamit kong brand is AISIN, so far ilang taon na ok pa naman. Kung Clutch nga baka Fake naman yung naikabit syo? na experience ko yan biglang bumigay yung rivet (nakalimutan ko na yung brand nung clutch) habang kinakarera ko yung Fuego ... hihihi

Mukhang ganun ata ang nangyari sa akin sir.... baka fake nga cguro ung nabili ko kasi ako mismo ang bumili habang binababa ng mekaniko ung transmission sa talyer...ok naman ang rpm nasa 800 naman pag naka idle....mga magakno kaya ung AISIN sir....di ba 1 set un pag pinalitan ung clutch disc,PP at release bearing...TNX sir....God bless

**Mac40** · May 29th, 2011 11:23 PM

Originally Posted by ben1031

Gud day po mga bossing..

..ask ko lang po ba ang brand na maganda at magkano kaya for clutch lining, pressure plate at release bearing...kasi mukhang yung nabili ko last year mukhang bibigay na eh

.eh wala pang 10K km ang natakbo ng sasakyan ko..ok naman yung tramission oil at gear oil kapapalit ko lang ..may konting shake kasi ang sasakyan ko sa arangkada..parang hirap...ung point na aftre mo naikambyo,,ung pag angat ng paa sa clutch pedal.don ko nararamdaman ung shake ng sasakyan at makina..un din kasi ang naisip ng mekaniko na napagtanungan ko...or any posibilities or problem na pwede rin mag cause ng shaking ng sasakyan sa arangkada..... maraming salamat po....God bless

Sir try mo po sa Jaysons near Baliwag Bus terminal between Haligi and Bambang:

Clutch disk-P3,000 (Exedy), Release bearing - P1,000., Pressure Plate - P2,800, and pivot bearing- P80.00(GMB).

**Col_em** · May 29th, 2011 11:50 PM

Originally Posted by Mac40

Sir try mo po sa Jaysons near Baliwag Bus terminal between Haligi and Bambang:

Clutch disk-P3,000 (Exedy), Release bearing - P1,000., Pressure Plate - P2,800, and pivot bearing- P80.00(GMB).

Sir may mechanic din ba sila para magpalit ng mga ito? magkano kaya labor? at ilang oras kaya bago mayari? TIA.

**Benzmizer** · May 30th, 2011 12:20 AM

Originally Posted by Col_em

Sir may mechanic din ba sila para magpalit ng mga ito? magkano kaya labor? at ilang oras kaya bago mayari? TIA.

I think they are just a parts shop.... not that sure thou.

Taking the chance, those residing south of Manila (Cavite/Batangas/Laguna), I know a very experienced ISUZU mechanic who can do your ISUZUs. He has a small shop in his house in Batangas. There are a good number of ISUZU forumers who has already had their ISUZUs done by this guy..... and they are VERY happy.

You can directly communicate to him for home service arrangements if he can facilitate. PM me so I could provide you his contact details.

**Col_em** · May 30th, 2011 02:55 AM

Originally Posted by Benzmizer

I think they are just a parts shop.... not that sure thou.

Taking the chance, those residing south of Manila (Cavite/Batangas/Laguna), I know a very experienced ISUZU mechanic who can do your ISUZUs. He has a small shop in his house in Batangas. There are a good number of ISUZU forumers who has already had their ISUZUs done by this guy..... and they are VERY happy.

You can directly communicate to him for home service arrangements if he can facilitate. PM me so I could provide you his contact details.

Thanks sir benz.

**blue_gambit** · May 30th, 2011 06:09 AM

Originally Posted by Mac40

Sir try mo po sa Jaysons near Baliwag Bus terminal between Haligi and Bambang:

Clutch disk-P3,000 (Exedy), Release bearing - P1,000., Pressure Plate - P2,800, and pivot bearing- P80.00(GMB).

Yan ba ang original parts? almost 7K din, never pa ko naka bili ng ganyan ang mahal pala. pag nag papalit ako ng cluth set usually nasa 4K mahal na... I think replacement parts farewell enough and are more practical.

Natandaan ko na yung Fake daiken yung brand kaya nag Aisin ako since Japan din naman...

**Ry_Tower** · May 30th, 2011 07:34 AM

^ Ok din exedy, replacement yan but hindi dapat ganyan kamahal nga.

Buti hindi fake yung nabili ko, meron pala. Aisin ba wala? hehe

**ben1031** · May 30th, 2011 07:35 AM

Originally Posted by Mac40

Sir try mo po sa Jaysons near Baliwag Bus terminal between Haligi and Bambang:

Clutch disk-P3,000 (Exedy), Release bearing - P1,000., Pressure Plate - P2,800, and pivot bearing- P80.00(GMB).

Sir exedy nga ung nabili ko noon....nag post pa nga ako noon dito pero di ko na matandaan kung ano page.....nabili ko na lang dito sa amin (pangasinan).....ask ko lang sir....pwede pa rin bang ibalik ung mga piyesa(clutch lining, PP at release bearing) if ever na ibaba ung transmission para lang ma check at masiguro kung un nga ang problema ng sasakyan ko...salamat po...God bless....

**Mac40** · May 30th, 2011 02:54 PM

Originally Posted by ben1031

Sir exedy nga ung nabili ko noon....nag post pa nga ako noon dito pero di ko na matandaan kung ano page.....nabili ko na lang dito sa amin (pangasinan).....ask ko lang sir....pwede pa rin bang ibalik ung mga piyesa(clutch lining, PP at release bearing) if ever na ibaba ung transmission para lang ma check at masiguro kung un nga ang problema ng sasakyan ko...salamat po...God bless....

Sir, original parts po yun except yung pivot bearing. Pa check mo po sir sa competent mechanic or better bring it to a casa, hindi naman po yata kailangan ibaba yung transmission mo para lang ma-check kung nandun ang problema, more or less alam na ng mechanic ang problema once dinala mo sa kanila at ma-evaluate yung unit mo.

**blue_gambit** · May 30th, 2011 04:30 PM

Originally Posted by ben1031

Sir exedy nga ung nabili ko noon....nag post pa nga ako noon dito pero di ko na matandaan kung ano page.....nabili ko na lang dito sa amin (pangasinan).....ask ko lang sir....pwede pa rin bang ibalik ung mga piyesa(clutch lining, PP at release bearing) if ever na ibaba ung transmission para lang ma check at masiguro kung un nga ang problema ng sasakyan ko...salamat po...God bless....

I doubt it, bihira sa auto supply pumapayag ng sole laluna kung gamit na...