Isuzu Dmax Owners [ARCHIVED]

[vanleano]

oo nga...wala talga filter yung sa a/c..sa ace hardware how much yung a/c filter..bibili na lang ako...ano ginawa niyo??paano yung frame nung filter??o basta sinalpak na lang dun..???

[wildthing]

^^from the thai website: http://www.d-maxclub.net/air%20Finter.htm




21x22x2 ang naintindihan ko lang na info (probably the measurements in inches of the cardboard)

[kurt]

finally replaced my evaporator coil. total bill is 6000.
used the replacement serpintine type, with only 12 rows of fin vs. 21 for the original.

nakita ko yun original na alok sa akin, i wasnt impressed. pareho yun design halos but the metal surface wasnt as shiny (same color as the replacement, it even looks like they have the same manufacturer).

buteven with regular cleaning i ended up with a busted coil. so ok na rin yun replacement. Made in Thailand daw and its made for the dmax. PACO ata yun brand

[isketi]

^^from the thai website: http://www.d-maxclub.net/air%20Finter.htm




21x22x2 ang naintindihan ko lang na info (probably the measurements in inches of the cardboard)

wildthing, mukang kayang-kaya mong magmolde nung cartridge frame para dun sa DIY cabin air filter. Mag-improvise ka na lang ng clips to hold the 3M filter.

[isketi]

finally replaced my evaporator coil. total bill is 6000.
used the replacement serpintine type, with only 12 rows of fin vs. 21 for the original.

nakita ko yun original na alok sa akin, i wasnt impressed. pareho yun design halos but the metal surface wasnt as shiny (same color as the replacement, it even looks like they have the same manufacturer).

buteven with regular cleaning i ended up with a busted coil. so ok na rin yun replacement. Made in Thailand daw and its made for the dmax. PACO ata yun brand

Where did you get your new evaporator bro?

[wildthing]

madaling ngang gawin yung ganung filter cartridge... kaso i'm so damn busy sa work

[isketi]

Ok lang yun. No rush.

Mukhang through time kasi magkakalasug-lasog yung cardboard frame tapos yun naman ang babara sa evaporator.

[kurt]

isketi,

tridrive aircon, small shop near marcos hiway cor petron/zexel, rightturn dun.

been a customer of their's for a long time kaya may loyalty discount.

pero i think supplier dependent yun quality ng parts, QC based ata, deliver lang parts on PO basis.

kaya yun regular aircon shop mo might get a similar part at different price. or they could get a better looking evaporator.

my unit's markings are PACO, CID-03-L isuzu dmax, some thailand sticker.

[isketi]

Thanks kurt for the info. Mukhang iisa nga lang ang supplier ng mga yan.

[batosai]

Mga sir ask ko lng po un po bang 4jh1 engine ng DMAX ay CRDI na din? Or ung 4jj1 lng ang naka CRDI.

TIA