Isuzu Dmax Owners [ARCHIVED]

**fiber_09** · April 29th, 2008 07:49 PM

pd po b mgtnng kng nsa mgkno ung sports bars ng carryboy?nka dmax07 po ako from lucena city.thx

**kurt** · April 30th, 2008 09:04 AM

50k.kms pms for 6000. costs less than when i had mine, mga 12000 pa.

basically its a 20k.kms procedure, change all fluids, grease and lubricants. with the addition of changing the air and fuel filters.

but if they done the above during your 40k.kms pms, change oil and tune basically and brake cleaning nalang ciguro sa 50k.kms.

Originally Posted by x_jason_x

guys sino na sa inyo nagpa 50t kms check up?

nagpaestimate kasi ako for 50t kms check up.. baka daw umabot ng 6,000. Ano ba yun mga gagawin for 50t check up?

**vanleano** · April 30th, 2008 11:58 AM

finally, got new tires for my dmax. upgraded to pirelli scorpion atr at 5,900 ea.
265/70/r16 narin. based my choice on reviews from tirerack.com, general appearance and comparitively cheaper than dueler 694 (my first choice before). yun at/r type daw ng pirelli ay "softer AT" better suited for on-road use versus traditional A/t.

satisfied ako pero. just located the age of the tire its week 40 year 2007. or about 7 months old na. is this still ok nearly a year na since date of manufacture upto first use ko?

its probably nothing was just expecting year 2008 tires.

where did you get your tires bro??mura ba??kasama na lahat??mounting balancing etc????am planin din to upgrade ng ganyan size..u have pix of the tires installed na???

**kurt** · April 30th, 2008 02:38 PM

tires only, plus new pito each. seperate ko pa pagawa balancing at wheel alignment sa servitek. marikina lamuan.

i think its market price narin. pero yun 6200 (cash) per bridgestone 694 is the lowest i got.

if you want, latest model ata sa market is that dunlop at3 like memphis's, same price like pirelli. but soft compound daw kaya tendency mas madaling maupod.

take note yun clearance sa front. mala millimiters nalang ata pag todo kabig liko bago may tamaan sa wheel area.

pirelli tires are the official tires of WRC, yun nalang last (porma factor) basis ko over bridgestone na F1 naman.

**vanleano** · April 30th, 2008 03:32 PM

wala naman rubbing issues ang 265/70/r16???any recommendations pa na brand of tires for dmax???dunlop and pirelli lang???what about yung bridgeston a/t revo??

**Memphis Raines** · April 30th, 2008 04:24 PM

Hey guys, dami nyo na palang posts. Check attendance muna...

x_jason_x buti naman nakapost ka uli busy ka ata eh

. If I remember correctly, there was a D-max owner here that has reached the 50K service. I think he also had his bearings repacked aside from the fuel and air filters.

vanleano - sobra luwag pa ang 265s. I think you won't have any rubbing even up to a rim width of about 8". Our stock 7" have no problems with this. Pirelli Scorpion was my first choice before the AT3s, good feedback kasi ang pirellis, but then I wanted to try out the newest from the Grantrek series which has a more aggressive sidewall design.

Kurt is right, my first observation sa AT3s is the very soft sidewalls so I guess the compound is semi-soft to medium. Tire life I can't tell kasi nga bagong labas pa. What I really like about it is that it offers a cushy ride and has a neat grip around the bends.

**Memphis Raines** · April 30th, 2008 04:38 PM

Originally Posted by fiber_09

pd po b mgtnng kng nsa mgkno ung sports bars ng carryboy?nka dmax07 po ako from lucena city.thx

Welcome to the forum po! You can PM ARB for your sportbars, he is a CarryBoy Dealer.

**kurt** · April 30th, 2008 05:30 PM

what really set me up for the pirellis was the scorpion logo. astig. wish it could have been twice as big.

i have something on my mind though that wants me to re-set the mounting of my tires. according to the carbibles.com parang the yellow or red colored dot must be the marker where you should align the pito for a better balance. but nung kabit bagong tires bara-bara lang.

end result could be the use of more weights to balance the wheel/tire. yun lang.

**x_jason_x** · April 30th, 2008 07:13 PM

MR,

oo nga e. busy kasi super sa school kaya di makapost. hehe. Ah so kailangan pa pala iparepack yun wheel bearings. Di ko yun pinapagawa sa casa kasi I dont want them removing my mags.

OT: kala ko wala na dmax thread natin, yun pala nasa sticky na! haha

**kikoy** · May 1st, 2008 12:15 AM

Hi to all,

I just want to ask who knows how to adjust the headlights for the new DMAX with projectors. I tried turning the two 8mm nuts on the back of the headlight but they both adjust the up and down of the projector lights only. How can i adjust the left - right on the projectors? Also the high beam how do i adjust it? Please help if you have already tried this adjustments on your headlights.

Thank you