Isuzu Crosswind XUV/XUVi Owners

**x-wind** · October 18th, 2005 10:58 PM

Originally Posted by nerbyoso

may tanong pa ako..yung pillars (both sides) between 2nd and 3rd row may napansin ako cracks about an inch long dun mismo sa base, door side..parehong side ng sasakyan..metal fatigue? meron ba kayong napansin na ganito on your isuzu's?

baka naman yun dati my ari malalaki katawan kya kung mabuksan pinto subra kay bumigay yun base door pa repair mo na ka agad para di pa humaba punit nya.

**docrjay** · October 19th, 2005 06:59 PM

Hi guys, since this is a crosswind thread. Wanna ask where could I look for 2nd hand crosswind XT for 350K. I tried to look around pero all I saw being sold were XTO version and I cannot afford them. They go around 400-500K. Its my 1st time to buy a car, so your suggestions are all welcome.

Thanks in advance.

**nerbyoso** · December 20th, 2005 03:28 PM

BTW guys, sinalbahe yata yung left side mirror ko...parang tinulak ng malakas papunta sa harap..umangat/mukang may nabali sa mechanism..yung mga ball bearings nawala sa pwesto..its the motorized type..i took the car at isuzu pasig..they said they cannot/or dont repair those types problems and that the replacement wud cost around 13k! Jesus! unbelievable!

now the problem is i dont think i can afford that..the motor controlling the mirror itself is still working properly...meron ba kayong alam gumagawa nito o merong nabibiling medyo mas resonable ang presyo kasama installation?

naisip ko nga i-epoxy ko nalang... yun nga lang di na matitiklop.

pls pardon me...bat merong mga taong wala talagang magawang mabuti.. :mad: yung revo ng kapitbahay namin inihian sa rear door at ginasgasan pa..we park on the same lot.

**nerbyoso** · December 20th, 2005 05:10 PM

Originally Posted by docrjay

Hi guys, since this is a crosswind thread. Wanna ask where could I look for 2nd hand crosswind XT for 350K. I tried to look around pero all I saw being sold were XTO version and I cannot afford them. They go around 400-500K. Its my 1st time to buy a car, so your suggestions are all welcome.

Thanks in advance.

subukan mong tumingin sa mga bangko ng mga nabatak...it wud help kung may kakilala ka.

**XTO** · December 21st, 2005 01:51 PM

Originally Posted by docrjay

Hi guys, since this is a crosswind thread. Wanna ask where could I look for 2nd hand crosswind XT for 350K. I tried to look around pero all I saw being sold were XTO version and I cannot afford them. They go around 400-500K. Its my 1st time to buy a car, so your suggestions are all welcome.

Thanks in advance.

tyaga tyaga ka lang mag-search sa buy & sell. it will pay off.

**x-wind** · December 21st, 2005 02:17 PM

Originally Posted by nerbyoso

BTW guys, sinalbahe yata yung left side mirror ko...parang tinulak ng malakas papunta sa harap..umangat/mukang may nabali sa mechanism..yung mga ball bearings nawala sa pwesto..its the motorized type..i took the car at isuzu pasig..they said they cannot/or dont repair those types problems and that the replacement wud cost around 13k! Jesus! unbelievable!

now the problem is i dont think i can afford that..the motor controlling the mirror itself is still working properly...meron ba kayong alam gumagawa nito o merong nabibiling medyo mas resonable ang presyo kasama installation?

naisip ko nga i-epoxy ko nalang... yun nga lang di na matitiklop.

pls pardon me...bat merong mga taong wala talagang magawang mabuti.. :mad: yung revo ng kapitbahay namin inihian sa rear door at ginasgasan pa..we park on the same lot.

baklasin mo muna baka natangal lang yun lock nung spring sa loob
1. first open door sidings and disconnect electrical connection
2. second may 4 pcs or 3 na screw sa loob ng door kalasin mo then saka mo matangal yun side mirror
3. try mo dahandahan tangalin yun naka clip sa salamin para matangal mo sya (inagt lang baka mabasag salamin)
4. then mababaklas mo na yun sa loob dun makikita mo tangal yun lock nung spring.

try ko post yun pic hanapin ko lang

diy pwede yan gud luk

**nerbyoso** · December 22nd, 2005 11:02 AM

Originally Posted by x-wind

baklasin mo muna baka natangal lang yun lock nung spring sa loob
1. first open door sidings and disconnect electrical connection
2. second may 4 pcs or 3 na screw sa loob ng door kalasin mo then saka mo matangal yun side mirror
3. try mo dahandahan tangalin yun naka clip sa salamin para matangal mo sya (inagt lang baka mabasag salamin)
4. then mababaklas mo na yun sa loob dun makikita mo tangal yun lock nung spring.

try ko post yun pic hanapin ko lang

diy pwede yan gud luk

x-wind, thanks a lot bro..you've been very helpful..pls do post the pic...hindi ko kasi kabisado mechanism nito...they dont want to do it, i'll do it...i'll wait for the pic anyway di ko rin magagawa ngayon kasi nasa isuzu pasig yung auto for paint job...january na daw makukuha.

**x-wind** · December 22nd, 2005 01:49 PM

Originally Posted by nerbyoso

x-wind, thanks a lot bro..you've been very helpful..pls do post the pic...hindi ko kasi kabisado mechanism nito...they dont want to do it, i'll do it...i'll wait for the pic anyway di ko rin magagawa ngayon kasi nasa isuzu pasig yung auto for paint job...january na daw makukuha.

pabaklas mo yun side mirror or ask mo natatangalin mo para ma repair mo na.

hope this pic can help

pic 1a after matangal yunglass ( white nanakikita mo yan yun pang dikit sa glass kaunting ingat lang matatangal mo yan pag balik mo pwede pang gamitin yun )
pic 2a after matangal yun center screw ( tangal dito yun plate na holder ng glass)
pic 3a after matangal yun mechanism malamang yan sayo tangal yun lock nung spring tyaga lang mahirap mag balik nung lock pag nakalagay na yun spring

may bulitas din yan dalawa or tatlo sana nandun pa

pero diy kaya yan

**nerbyoso** · December 22nd, 2005 03:04 PM

x-wind, wow! where did you get these pics?! mukang crosswind side mirror talaga yan ah...nakikita ko nga yang "swivel shaft" na yan pag inaangat ko but i can pull it up more than an inch lang siguro dahil duon sa electrical cable...the bb's are still there..mga tatlo yata nakita ko.

you mean that white stuff is the only thing thats holding the mirror? what is the best tool in removing it? can i use a knife or a screw driver? pwede kaya initin to remove it more easily? i think thats the most tricky part eh.

**x-wind** · December 22nd, 2005 04:22 PM

Originally Posted by nerbyoso

x-wind, wow! where did you get these pics?! mukang crosswind side mirror talaga yan ah...nakikita ko nga yang "swivel shaft" na yan pag inaangat ko but i can pull it up more than an inch lang siguro dahil duon sa electrical cable...the bb's are still there..mga tatlo yata nakita ko.

you mean that white stuff is the only thing thats holding the mirror? what is the best tool in removing it? can i use a knife or a screw driver? pwede kaya initin to remove it more easily? i think thats the most tricky part eh.

it happen also on my unit kaya nabinaklas ko side mirror ko.

white stuff and yun sa edge nung glass parang naka clip all over sa glass. sa akin kasi pinuwersa ko so ang natangal yun holder ng glass saka ko lang na nadiscover na pwede tangalin yun glass first para di mahirapan. kung may kakilala ka sa banawe na sungkit boys ng side mirror baka kaya nila (joke only)
ingat lang bro