Hi mileage crosswind owners post your stories here

**Torque Master** · January 30th, 2010 06:52 PM

Mga sir.

sira AT transmission 2003 XUV ko VALVE BODY daw kinalawang wow for that part alone 42K na singil sakin tapos di pa sure kung kelan magkakarun ng available na parts. + 40K sa labor and re-build kit according to ISUZU PLARIDEL.

grabe kung alam ko lang ganito mag maintain ng crosswind na matic nag manual nalang sana ko. 95K kilometers pa lang tinakbo at never na nabaha as in kung pwede lang di gamitin pag umuulan eh sa garahe nalang ito.

balak ko na talaga ibenta

very depressing talaga

**holdencaulfield** · February 5th, 2010 01:39 PM

142k kms na xwind ko! mag 9 years old na di pa ko nabibigyan ng problema. di tulad ng innova sus! grabe! buti na lang di yun kinuha ko!
go isuzu go!

**willvill** · February 6th, 2010 06:29 AM

Originally Posted by Torque Master

Mga sir.

sira AT transmission 2003 XUV ko VALVE BODY daw kinalawang wow for that part alone 42K na singil sakin tapos di pa sure kung kelan magkakarun ng available na parts. + 40K sa labor and re-build kit according to ISUZU PLARIDEL.

grabe kung alam ko lang ganito mag maintain ng crosswind na matic nag manual nalang sana ko. 95K kilometers pa lang tinakbo at never na nabaha as in kung pwede lang di gamitin pag umuulan eh sa garahe nalang ito.

balak ko na talaga ibenta

very depressing talaga

Puede man daw palitan ng manual ang auto transmission. The cost could be the same as what you mentioned. Try to explore this option.

Brod. What could be the reason why "kinalawang" daw? Could it be failure to change the ATF fluid on schedule?

**willvill** · February 6th, 2010 06:40 AM

Originally Posted by sixgun

Hi guys. 170,000km na tinatakbo ng 2004 crosswind xuv namin. Recently napansin ko na hindi pantay yung kain ng gulong sa right tire kaya dinala ko para maalign yung gulong sa shop. Sinuggest nila na kailangan na daw palitan yung idler arm at mga bearing sa harap. Since nagmamadali din si ermat e, pumayag na kahit mahal yung singil. Kailangan ba talaga palitan to mga bossing? hindi daw kasi nila maaalign kung hindi papalitan ang mga ito. Nung chineck ko yung binaklas na idler arm halos kaunti lang yung wiggle nung replaced part. thanks.

Dat's right. It's difficult to align if there is wiggle in the wheel assembly.

**willvill** · February 6th, 2010 06:46 AM

Mga brads. 110tkms xto AT yung sa akin. I need to fill my radiator with a little bit over 1 liter of water every week. Is this normal?

I could not find any leak, though.

My Honda City 2004 does not need even a drop in between maintenance schedule.

**weisshorn** · February 6th, 2010 12:58 PM

Originally Posted by Torque Master

Mga sir.

sira AT transmission 2003 XUV ko VALVE BODY daw kinalawang wow for that part alone 42K na singil sakin tapos di pa sure kung kelan magkakarun ng available na parts. + 40K sa labor and re-build kit according to ISUZU PLARIDEL.

Paano nila nalaman na valve ang deperensya, nabuksan ba nila? Kung meron sanang shop manual para sa auto tranny mo mas madali malaman ang possible parts na papalitan. 40K+ labor and kit ouchh!!! Bumili ka na lang ng good surplus. Sa binilhan na rin ipakabit para cover ng warranty. Pwede rin kung convert to manual na lang then sabay benta..