My Civic FD Engine Problem

**yapoy86** · April 15th, 2018 04:45 PM

Originally Posted by choyh05

Parang wala naman grove. But the first pad we use parang uneven yung tear nya. So we buy original pads. For atleast one week ok sya walang ingay then after that balik na na naman yung ingay. Also we already tried na reface yung bagong disc brake.

Uneven wear is a sign that you need to lubricate the retaining pins. Try putting some silicone grease on the pins and back of the pads

**choyh05** · April 15th, 2018 07:57 PM

Originally Posted by yapoy86

Uneven wear is a sign that you need to lubricate the retaining pins. Try putting some silicone grease on the pins and back of the pads

Sorry wear po pala.. hahahaha

When we check the newly installed pads po ok naman. Walng sign na uneven wear. May possibility po ba na luma na yung mga rubber na naka install dun sa break. Nag experiment na nga kami sir na pinagpalit yung pads and disc brake ganun pa rin.

**choyh05** · April 17th, 2018 09:46 PM

Just to update regarding sa ingay sa sasakyan ko.

We change the stabilizing link at ball joint. Now it feels different at nawala yung ingay when i'm breaking. To be honest wala talaga akong idea na yun yung sira ng sasakyan. Lahat yata ng maririnig kong di tama sa sasakyan laging first time. hahaha.

Hope di na bumalik yung ingay.

By the way thanks sa lahat ng nag reply. Your inputs are very much appreciated since first ko lang nagka sasakyan.

**StockEngine** · April 17th, 2018 09:51 PM

Originally Posted by choyh05

Just to update regarding sa ingay sa sasakyan ko.

We change the stabilizing link at ball joint. Now it feels different at nawala yung ingay when i'm breaking. To be honest wala talaga akong idea na yun yung sira ng sasakyan. Lahat yata ng maririnig kong di tama sa sasakyan laging first time. hahaha.

Hope di na bumalik yung ingay.

By the way thanks sa lahat ng nag reply. Your inputs are very much appreciated since first ko lang nagka sasakyan.

good update bro. when the rubber fails, metal to metal sounds arent fun..

Sent from my SM-G935F using Tapatalk

**choyh05** · April 17th, 2018 10:07 PM

Originally Posted by StockEngine

good update bro. when the rubber fails, metal to metal sounds arent fun..

Sent from my SM-G935F using Tapatalk

Yes sir, as in nakakapraning. Eh ayaw ko rin minsan na parang may nararamdaman akong di tama kaya dinederecho ko agad sa mekaniko.

Mahirap kasi masirahan dito sa middle east. Lalo na ngayon pa summer na.