Honda CRV [archived]

**tancho_kuhaku** · August 29th, 2008 11:41 AM

share ko lang pics sa crv nakita ko sa taiwan. mugen lahat.

head turner na cguro ito doon sa taiwan. (for the owner of this car thanks for letting me take pics of your ride.)

and just last sunday. saw 1 crv na wala pang plate dito sa cebu, he changed his tambutso/muffler(parang isang BIG bazooka on the rear center sa crv nya. ganda! will post pics if ill see that crv again.

**rpacis** · September 2nd, 2008 08:00 AM

Originally Posted by kikoy

Hi guys! I'm new to this thread and i also own a 2003 CRV.

I want to ask about your suspension on your 2003-2006 crv's. Right now i can hear clunking noise on my suspension specially when the front hits uneven surfaces. Has anyone also have this problem on their CRV's? I'm also suspecting its the front sway bars. But i want to ask your help guys because you might have encountered this problem already and what to do with it.

I dont want to go directly to a Honda shop because they might tell you to change the front suspension components without even diagnosing the problem.

Please help guys.

Thank you

Originally Posted by scharnhorst

Sir, baka stabilizer link.

Na-resolve na ba yung naririnig mo na tunog? I have an '08 CRV 2.0 MT and am encountering the same problem. Dinala ko sa dealer more than a month ago at hindi nila ma-recreate yung tunog.

**kikoy** · September 5th, 2008 07:41 PM

Originally Posted by rpacis

Na-resolve na ba yung naririnig mo na tunog? I have an '08 CRV 2.0 MT and am encountering the same problem. Dinala ko sa dealer more than a month ago at hindi nila ma-recreate yung tunog.

Mga Sir, sorry still haven't had my V checked regarding suspension but as i was reading in U.S. forums they just changed the stabilizer bushings and thats all. The clunking problem is gone.

**yapoy86** · September 5th, 2008 09:40 PM

normally rubber bushings on stabilizer bar and rods causes clunking nose especially on small potholes... changing these really solves the problem at most times...

**rpacis** · September 8th, 2008 02:38 AM

Originally Posted by yapoy86

normally rubber bushings on stabilizer bar and rods causes clunking nose especially on small potholes... changing these really solves the problem at most times...

Gotcha. Thanks for all the responses! I will suggest this to the service specialist when I bring the unit to the dealer this week.

**jhanms** · October 22nd, 2008 11:52 AM

Meron po ba sa mga CRV owners dito na nag pa install ng 3rd row seat kagaya ng nasa picture? Sa mga meron san at magkano po pag pa install ng ganyan, thanks.

**RC-V** · October 22nd, 2008 07:20 PM

ok yung 3rd row seat may headrest yung sa stock kong 3rd row walang headrest.

**jhanms** · October 23rd, 2008 12:03 AM

Originally Posted by RC-V

ok yung 3rd row seat may headrest yung sa stock kong 3rd row walang headrest.

San kayo nag palagay ng 3rd row seat Sir?

**RC-V** · October 23rd, 2008 12:53 AM

yung akin kasi 10 seater 2002 model kasama na yung 3rd row seat no headrest nga lang saka removable yung sit.

**rpacis** · October 24th, 2008 04:03 PM

Originally Posted by yapoy86

normally rubber bushings on stabilizer bar and rods causes clunking nose especially on small potholes... changing these really solves the problem at most times...

I finally got our CRV back after spending three weeks at the dealer to get it fixed. We were able to re-create the clicking noise when I first brought it in earlier this month. However, they told me that upon checking the parts mentioned above, they didn't find anything wrong. I told them to check on my other service request (clutch problem, but the entire turn-around got me pissed off) but after they re-assembled the front suspension area, the noise was gone!

Must have been a loose bolt or something.