Honda crv 3rd gen issues please help

[Bloodz]

Hi Sir Szekan,

tanong ko lang kung saang shop nyo pinagawa yung Bushing ng EPS Rack N Pinion nyo?

issue din kasi ng FD ko yan palit na lahat ng pang ilalim pero kalampag pa din. yun pala yung pinaka Bushing ng Rack N Pinion problema. wala ako makita gumagawa. hassle tong EPS

Salamat sir!

[ManicCompressio]

hi guys, 1 week is gone and i am still repairing my car. at the start of this thread, my car had 3 problems...
1) knocking noise from under the car
2) transmission jerk and delay shifting
3) low idle rpm

so far work conducted

1) changed the following parts

LH engine mount
RH engine mount
Rear transmission mount
2 x KYB front shocker
1 x strut mount bearing
2 x stabilizer link
plus labor

31,000 peso

rebushing of rack and pinion
rack end and tie rod repair
ball joint press
labor

6,500 peso

All knocking noise solved.


2) changed the following
Surplus transmission and changed the damaged gears
8 litre transmission ATF
labor plus home service

30,000 peso

Transmission solved


3) did the following
new spark plugs
cleaned throttle body
cleaned MAF sensor
reset ECU
Reset throttle position

still the car idle is very low.... it is now in the hands of a very qualified technician by the name of Frank De Leon. hopefully he will solve this in his own fashion.... shall update soon

How often does this happen with 3rd gen crv? Or isolated issue lang ito due to wear and tear?

[Paengers]

Hi Sir Szekan,

tanong ko lang kung saang shop nyo pinagawa yung Bushing ng EPS Rack N Pinion nyo?

issue din kasi ng FD ko yan palit na lahat ng pang ilalim pero kalampag pa din. yun pala yung pinaka Bushing ng Rack N Pinion problema. wala ako makita gumagawa. hassle tong EPS

Salamat sir!

Same here po need ko po repair ng eps ng 2009 honda crv gen 3 ko po. You had it done for 6.5k? That's great. May i know also po knino po kayo nagpagawa? Thank you.

[Paengers]

Same here po need ko po repair ng eps ng 2009 honda crv gen 3 ko po. You had it done for 6.5k? That's great. May i know also po knino po kayo nagpagawa? Thank you.

Sorry i did not read your whole thread. Found what i was asking for. Thank you. Found it in you 3 thread.

[dyigon]

2007 crv 4x2. Bigla na lang umilaw ang airbag light. Ayaw na mag function ang speed lock, seat belt reminder light at chime.
Sa mga naka encounter na ng ganito sa crv. Saan ninyo pinagawa?

[joepaps52]

2007 crv 4x2. Bigla na lang umilaw ang airbag light. Ayaw na mag function ang speed lock, seat belt reminder light at chime.
Sa mga naka encounter na ng ganito sa crv. Saan ninyo pinagawa?

SRS Module Php 32k sa Honda Rizal, Ortigas Cainta. baka tumaas na ngayun. nagpalit ako 2016.

[travajante]

2007 crv 4x2. Bigla na lang umilaw ang airbag light. Ayaw na mag function ang speed lock, seat belt reminder light at chime.
Sa mga naka encounter na ng ganito sa crv. Saan ninyo pinagawa?

If it's the seat weight sensor that detects being sat/occupied, the hobo route would be to bypass w/ SRS fooling resistors.
Sample:
HONDA 2.7 OHMS OHM SRS AIRBAG RESISTORS RESISTOR .25W 2 AMP FUSED FAULT LIGHT | eBay

Sent from my SM-G950F using Tapatalk

[dyigon]

Pwede ba i-repair ang airbag module?

[travajante]

Pwede ba i-repair ang airbag module?

I wouldn't trust a repaired module.

Sent from my SM-G950F using Tapatalk

[Walter]

Search FB for specialists who repair computer modules ...