New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 686 of 884 FirstFirst ... 586636676682683684685686687688689690696736786 ... LastLast
Results 6,851 to 6,860 of 8837
  1. Join Date
    Apr 2016
    Posts
    9
    #6851
    Mga Sir,

    Regarding doon sa start button. nagloko nanaman kahit gamit ko yung extra keyfob na bagong palit yung batt, i think 5 or 6 months ago. Pinatingin sa casa sabi nila interference lang daw ng keyfob sa start button dahil sa mga coins. eh yung coins simula nung unang bili yun nakalagay na doon sa cup holder sa harap. Kaya i dont think yun ang prob. mukhang wala pang nakaka experience nang ganon dito

  2. Join Date
    Dec 2014
    Posts
    1,253
    #6852
    Quote Originally Posted by Vodka View Post
    LOL i'm not expert. just pissed when the stealership tries to rip me off. of course they'll never get away w/ it LOL

    don't worry about plastic reservoir there's no way it'll leak coz of type1

    back to fundamentals, what's coolant? it's basically water coz water cools well but also a bunch of additives: glycol raises boiling point. anticorrosives. lubricants. anti-cavitation additives. etc

    why anticorrosives? to prevent corrosion of metal parts inside which is a BAD THING for obvious reasons. type1 uses an older technology wherein it uses chemicals that get depleted over time in order to perform its anti-corrosive job, that's why you change it so often. type2 is a totally different chemistry that lasts 10 years (organic acid tech). type1 and type2 have totally different ways of doing the anticorrosive part

    as i mentioned before the insides of your engine and cooling system (radiator etc) have already reacted CHEMICALLY w/ the type2. so mixing type1 can have some bad effects. imagine mixing some epoxy adhesive, then adding mighty bond to it how good would that be LOL





    kaya nga bili ka dapat ng type2. kung wala lagyan mo nalang ng distilled water. remember that coolant loss is due to evaporation and permeation through rubber hoses etc. only the water evaporates leaving the additives inside so it's ok to "dilute" w/ plain distilled water as long as it's just a small quantity

    in other words it's better to "dilute" the coolant w/ water than to contaminate it w/ type1
    Thanks sa explanation sir!

    Ang nakaka badtrip pa eh yung additives na X1R laging kasama sa list every PMS

  3. Join Date
    Nov 2009
    Posts
    12,363
    #6853
    Quote Originally Posted by dhisky View Post
    Thanks sa explanation sir!

    Ang nakaka badtrip pa eh yung additives na X1R laging kasama sa list every PMS
    Malaki ata binayad ni X1R sa Honda Phils?

    Both Ayala and Yuchengco group is offering it, no idea sa ibang dealers na hindi handled nung dalawa.

    Pero optional naman nga, be mindful to check lagi para wala ikarga na optionals.


    Off topic

    Before I posted na some converted mp3s saved in my flash drive is not playing, what I did was I renamed the filename or shortened it. Now all is playing na.


    Sent from my iPhone using Tapatalk

  4. Join Date
    Nov 2009
    Posts
    12,363
    #6854
    Quote Originally Posted by didin View Post
    Mga Sir,

    Regarding doon sa start button. nagloko nanaman kahit gamit ko yung extra keyfob na bagong palit yung batt, i think 5 or 6 months ago. Pinatingin sa casa sabi nila interference lang daw ng keyfob sa start button dahil sa mga coins. eh yung coins simula nung unang bili yun nakalagay na doon sa cup holder sa harap. Kaya i dont think yun ang prob. mukhang wala pang nakaka experience nang ganon dito
    May lagayan din ako coins dun sa cup holder, never naman nagka issue with the push start.

    Hmmm either your keyfob or sa sensor nung car ang problem bro ah? Update mo kami if na pinpoint na.


    Sent from my iPhone using Tapatalk

  5. Join Date
    Mar 2017
    Posts
    655
    #6855
    Quote Originally Posted by cast_no_shadow View Post
    Malaki ata binayad ni X1R sa Honda Phils?

    Both Ayala and Yuchengco group is offering it, no idea sa ibang dealers na hindi handled nung dalawa.

    Pero optional naman nga, be mindful to check lagi para wala ikarga na optionals.


    Off topic

    Before I posted na some converted mp3s saved in my flash drive is not playing, what I did was I renamed the filename or shortened it. Now all is playing na.


    Sent from my iPhone using Tapatalk
    Nice! Matry nga to bro. Haha.
    Recently kasi youtube or spotify via mobile data lang ako, dahil konti lang nagpplay sa SD card ko. Bilis ko tuloy maubos 6GB cap ko before matapos yung month.


    Sent from my iPhone using Tapatalk

  6. Join Date
    Nov 2009
    Posts
    12,363
    #6856
    Quote Originally Posted by arvs18 View Post
    Nice! Matry nga to bro. Haha.
    Recently kasi youtube or spotify via mobile data lang ako, dahil konti lang nagpplay sa SD card ko. Bilis ko tuloy maubos 6GB cap ko before matapos yung month.


    Sent from my iPhone using Tapatalk
    Yes bro, I convert youtube to mp3, some are playing outright some are not.

    Yung mga hindi nagpaplay i renamed or shortened the file name. Alas! Nagplay na hehe



    Sent from my iPhone using Tapatalk

  7. Join Date
    Aug 2010
    Posts
    117
    #6857
    mga sir, napansin ni misis na ang bilis lumambot ng isang tire ko (front, drivers side) 3-5 psi everyday na magpapahangin sya. sabi nya may bulge sa gilid ng gulong im not sure yet kung sa sidewall mismo, inaantay ko yung picture na ipapadala nya, i will share it to you pag natanggap ko na.

    ano po ba dapat gawin? call honda for warranty claim or call insurance para sa claim? covered po ba ng warranty or insurance to? kung sidewall ang tama malamang magpapalilt na ako ng gulong. ano po ang recommended na gulong na ipalit? and how much po ang damage? ok lang ba ng ibang brand ng gulong yung isa? (hehe sorry newbie) or ok lang lang ba na isa lang ang palitan? (i mean, dapat ba pair ang ipalit?)

    pasensya na po, i need your advise very badly...

  8. Join Date
    Nov 2009
    Posts
    12,363
    #6858
    Quote Originally Posted by ronmayajoan View Post
    mga sir, napansin ni misis na ang bilis lumambot ng isang tire ko (front, drivers side) 3-5 psi everyday na magpapahangin sya. sabi nya may bulge sa gilid ng gulong im not sure yet kung sa sidewall mismo, inaantay ko yung picture na ipapadala nya, i will share it to you pag natanggap ko na.

    ano po ba dapat gawin? call honda for warranty claim or call insurance para sa claim? covered po ba ng warranty or insurance to? kung sidewall ang tama malamang magpapalilt na ako ng gulong. ano po ang recommended na gulong na ipalit? and how much po ang damage? ok lang ba ng ibang brand ng gulong yung isa? (hehe sorry newbie) or ok lang lang ba na isa lang ang palitan? (i mean, dapat ba pair ang ipalit?)

    pasensya na po, i need your advise very badly...
    I don't think dahil sa bulge kaya bumabawas ng hangin gulong mo.

    Probably may pako/turnilyo yan or baka sa pito may singaw, she can bring it to any reputable vulcanizing shops para ipa check.

    About sa bulge, wala warranty dyan and hindi rin covered nang insurance unless you were involved sa accident.

    I replaced my both front tires due to bulge, kaso turanzas pa din. You can replace it with any brand as long as same specs or basta suwak sa rims mo.


    Sent from my iPhone using Tapatalk

  9. Join Date
    Aug 2010
    Posts
    117
    #6859
    Quote Originally Posted by cast_no_shadow View Post
    I don't think dahil sa bulge kaya bumabawas ng hangin gulong mo.

    Probably may pako/turnilyo yan or baka sa pito may singaw, she can bring it to any reputable vulcanizing shops para ipa check.

    About sa bulge, wala warranty dyan and hindi rin covered nang insurance unless you were involved sa accident.

    I replaced my both front tires due to bulge, kaso turanzas pa din. You can replace it with any brand as long as same specs or basta suwak sa rims mo.


    Sent from my iPhone using Tapatalk

    thank you CNS. So i will advise her na dalin na kagad sa maayos na vulcanizing shop para matingnan na yung cause ng singaw. makapag canvass na din ng gulong para mapalitan yung may bulge. Turanza ba ang recommended the brand boss?

  10. Join Date
    Nov 2009
    Posts
    12,363
    #6860
    Quote Originally Posted by ronmayajoan View Post
    thank you CNS. So i will advise her na dalin na kagad sa maayos na vulcanizing shop para matingnan na yung cause ng singaw. makapag canvass na din ng gulong para mapalitan yung may bulge. Turanza ba ang recommended the brand boss?
    Recommended? Nope, that time nung nagpalit ako ang hirap humanap ibang brand na same oem specs.

    At the same time ayoko din naman mag unknown brands.

    Hanap kamo siya Goodyear Servitek for the tire check.


    Sent from my iPhone using Tapatalk

Tags for this Thread

2014 Honda City (Gen 4)