Results 11 to 16 of 16
-
Verified Tsikot Member
- Join Date
- Dec 2010
- Posts
- 100
May 9th, 2012 09:40 PM #11^ ganyan din kotse ko.. inuna ko muna lahat ng madaling palitan (crankshaft position and Camshaft position sensors, ignition coil, tension wires, etc) hanggang sa umabot sa ECU. ayun, sira na pala ECU ko. nagpalit ako ng ECU and the 2 major problems of my car went away.
major problems are exactly like yours: hard starting and dying pagka-bumabagal or kung tinatapakan ang brakes.
hyundai 1997 tiburon kotse ko hehe.
-
Tsikoteer
- Join Date
- Jul 2011
- Posts
- 399
May 10th, 2012 12:02 AM #12GA16dne engine, try cleaning the PCV first. Remove the air filter and its housing then you will see soleniods with violet and brown socket connectors. Try removing the assembly carefully and clean it using penetrating oil like WD40.
-
Tsikoteer
- Join Date
- Jul 2011
- Posts
- 399
May 10th, 2012 01:47 PM #13Oo nga dapat in capital letters yun word carefully. Use socket in removing the assembly but before removing the assembly its better to loosen up first the soleniods using close wench with the correct size.
-
Verified Tsikot Member
- Join Date
- Aug 2010
- Posts
- 224
May 10th, 2012 04:34 PM #14Ako kakareplace lang starter hehe..
Dapat po yung mang george na mismo gumawa sa simula pa para wala na sakit ulo hehe..
-
May 10th, 2012 04:55 PM #15
-
BANNED BANNED BANNED
- Join Date
- Feb 2011
- Posts
- 1,442
May 17th, 2012 03:06 AM #16matagal na notorious yan Nissan sa C5 ba? since 1990's pa in in the reign of the civics/accord. kasi sa sobrang desperado daw ng mga tao dyan, pati Honda cars binenta nila, lapit lang sa kanila eh heheh
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?