im planning to buy 2nd hand ford lynx gsi model 2000

**3rd3rd** · June 19th, 2009 02:58 AM

i've just acquired ds car recently... every thing turns out well except for one thing. hindi ko kasi alam kung normal lang sa Ford yun or not. Tuwing magstart kasi ako ng engine, para magaccelearate, kailangan muna mareach nung kotse yung certain temp bago umandar... mga at least 5 mins. ko pa kailangan painitin yung makina. ganun ba talaga??? is it normal? or there is something wrong with the car. kapag mainit naman yung makina, maayos na ang takbo. ayaw lang talaga umandar, kahit na tapakan yung gas kapag malamig yung makina. Need help regarding this matter. thanks! God bless!

**harushey** · June 22nd, 2009 06:21 PM

have been using already my lynx for 3weeks..so far so good naman yung gamit namin..i think its not normal kung ganun yung set up ng lynx mo. kasi ung saken naman, once mgstart up ka ng engine..anytime umaandar agad..no need to wait for the temperature na mg-cool down.

have you been always checking your radiator and oil before using your lynx?

before afraid ako pagbuy nung lynx, pero nung nagagamit ko na, siguro proper use at i-maintain lang lahat..everything will goes well.

try mo na lang din ipa-check yung lynx mo sa shop. free naman ang check up di ba.

**danely21** · July 4th, 2009 09:58 PM

pa chek mo sa shop nga yang oto mo , sakin i axquired the car last two weeks ago nag patune up ako and change oil ang ganda ng takbo 1.3 lynx 04 gamit ko . nung unang gamit ko nababagalan ako ako then i cheked it out sa shop for tune up and change oil ang ganda ng hatak ....i also using lancer 1.6 glxi na 93 , ang layo ng difrence ng hatak pero mas fuel efficint ang ford kasi ma[liit kalng makina