Since the spark plug are not getting wet, wala pang gasolina na pumapasok sa combustion chamber, try to force feed gasoline sa carburator, remove the air filter and pour a tablespoon of gasoline sa carb (doon sa may primary barrel or doon sa may kinalalagyan ng manual choke), then try to start.

Kahit mali mali ang lagay ng hi-tension wire mo, mayroom ka dapat maririnig na firing. Kung walang back/after fire na nagaganap please do check the supply line of the distributor.

If mayroon after/back fire, then proceed with finding the right hi-tension wire, by locating the number 1 on the distributor cap, then connecting the shortest hi-tension wire to these and to the number 1 cylinder (nearest the distributor/timing belt)

Follow the arrow on the distributor cap, the next is number 3, connect the hi-tension wire (3rd longest) to this and the other end to number 3 cylinder (counting 1 from the timing belt/distributor)

next is 4, then 2

if still doesn't work, recheck and recheck all you work, patient is needed in DIY