New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. Join Date
    Nov 2004
    Posts
    505
    #1
    Share ko lang sa mga naghahanap ng mahusay na mekaniko na mura maningil.

    Marikina Antipolo area

    0916-5827200
    Boy Romero

    Dati sya Chief Mechanic sa Mitsubishi then Toyota. 20years Casa Experience. Shop nya sa garage nya kaya reasonable maningil at may tawad pa. Kumpleto sa gamit from obd pati pang baba ng engine.
    Gas or Diesel From regular pms to general engine overhaul pati transmission matic or manual ginagawa nya.
    Banggitin nyo refer kayo ni Pao from tsikot ask for more discount.

    Sent from my LG-H870DS using Tapatalk

  2. Join Date
    Aug 2017
    Posts
    232
    #2
    Will try him out since I live in Marikina Thanks!

    Sent from my EVA-L19 using Tsikot Forums mobile app

  3. Join Date
    Nov 2007
    Posts
    1,587
    #3
    Same here. Thank you


    Sent from my iPhone using Tapatalk

  4. Join Date
    Jul 2016
    Posts
    17
    #4
    Good am mga ka tsikot. Ask ko lang if active pa etong number ni sir Boy Romero. I've been trying to rwach him thru this number but sadly wala ako makuha response. Need kasi ng reliable mechanic near Antipolo area. Maraming salamat sa mga sasagot.

    More power to Tsikot!

  5. Join Date
    Nov 2004
    Posts
    505
    #5
    Yes ser +63 916 582 7200 pa din number ni "tito boy" as we call him. May pajero sya gawa nung punta ko last month, around 60k daw sinisingil nung ibang several shops, baba ang makina kasi, inabot lang kay tito boy ng 20+k, personal nya kasi inspect at marami daw hindi nmn kelangan palitan, pati pagbili ng pyesa tinuturo nya kung saan mura like bestcolt in banawe etc imbes na isekreto at patungan nya encourage nya pa to canvass yun mismo customer. Pag sya pinabili nyo pyesa pati resibo ibibigay sayo pagkatapos ng trabaho.
    Kalalabas lng ng spacegear namin sa kanya, naputulan ng segunyal, pina tow ko dinala sa reputable shop na mura din maningil sa banawe dun kasi malapit, 90k ang estimate marami daw kasi papalitan. San ko nmn hagilapin yun 90k biglaan pa. Pinatow ko ulit hanggang masinag sa shop ni tito boy, nung matapos inabot lang around 20k labor materials total.



    Sent from my LG-H870DS using Tapatalk
    Last edited by halimaw; September 9th, 2017 at 11:24 AM.

  6. Join Date
    Jul 2016
    Posts
    17
    #6
    Thank you sir Halimaw! Saan nga pal shop ni sir Boy? near masinag lng din location ko kasi.




  7. Join Date
    Aug 2017
    Posts
    232
    #7
    Quote Originally Posted by Kapitan tutan View Post
    Thank you sir Halimaw! Saan nga pal shop ni sir Boy? near masinag lng din location ko kasi.



    Sa may Oliveros siya. Just went there for our Revo ATF dialysis. Charge ng labor is 3000. Drain and clean.

    Sent from my EVA-L19 using Tsikot Forums mobile app

  8. Join Date
    Oct 2012
    Posts
    27,626
    #8
    Quote Originally Posted by willownavarro View Post
    Sa may Oliveros siya. Just went there for our Revo ATF dialysis. Charge ng labor is 3000. Drain and clean.

    Sent from my EVA-L19 using Tsikot Forums mobile app
    labor alone is 3000? how much was the atf and ilang liters?

  9. Join Date
    Aug 2017
    Posts
    232
    #9
    Quote Originally Posted by StockEngine View Post
    labor alone is 3000? how much was the atf and ilang liters?
    Yes. Labor alone. Cause he mentioned that other mechanics just drain then put in the new oil, while he on the other hand, also cleans the strainer (? I don't remember the term) and no machine is used. ATF used was Dexron III at 170/L (10liters)

    I told him that Exalta in Banawe charges 600 for labor only. Sabi nya their techniques are different daw kasi.

    Sent from my EVA-L19 using Tsikot Forums mobile app

  10. Join Date
    Oct 2012
    Posts
    27,626
    #10
    Quote Originally Posted by willownavarro View Post
    Yes. Labor alone. Cause he mentioned that other mechanics just drain then put in the new oil, while he on the other hand, also cleans the strainer (? I don't remember the term) and no machine is used. ATF used was Dexron III at 170/L (10liters)

    I told him that Exalta in Banawe charges 600 for labor only. Sabi nya their techniques are different daw kasi.

    Sent from my EVA-L19 using Tsikot Forums mobile app
    di mo nakita how the atf change was done?

Page 1 of 2 12 LastLast

Tags for this Thread

Mechanic na Magaling at Mura Singil Marikina Antipolo Area