Results 1 to 8 of 8
-
Verified Tsikot Member
- Join Date
- Sep 2011
- Posts
- 37
April 17th, 2012 11:53 PM #1mga boss
magtatanong lang ako kung ano maganda gawin para mag fit ulit yung ng dip stick ng engine ng sa ganon hindi magleak ang oil. natatapon kasi engine oil dahil maluwag na yung rubber ng dip stick. lancer 89 model pala yung auto
maraming salamat
-
Tsikoteer
- Join Date
- Aug 2011
- Posts
- 564
-
Verified Tsikot Member
- Join Date
- Sep 2011
- Posts
- 37
April 18th, 2012 12:19 AM #3
-
April 18th, 2012 03:53 PM #4
at the base of the dipstick handle there is an o-ring. this o-ring cracks from heat and exposure to petroleum in time. you can purchase a repalcement o-ring from manila bearing center (don't know if they still exist-been there about twenty years ago) or you can find it at other parts stores. or, replace the dipstick with another used one
-
Tsikoteer
- Join Date
- Jun 2010
- Posts
- 321
April 18th, 2012 05:51 PM #5retrofit mo na lang using glue stick, hintay mong matuyo then tabasin mo na lang.......
\
-
Verified Tsikot Member
- Join Date
- Dec 2003
- Posts
- 137
-
April 21st, 2012 02:30 PM #7
-
Tsikoteer
- Join Date
- Jul 2011
- Posts
- 584
May 5th, 2012 08:10 AM #8may o-ring din ba dip stick ng '89 lancer na ganyan di ko yata napansin hehehe.
kug wala try to retrofit the dip-stick to accommodate an o-ring baka pede hehehe
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?