Results 11 to 14 of 14
-
April 24th, 2008 11:57 AM #11
Re-bore... hmmm... I don't know. Depends on the block. Most you could probably do is gain about 0.05 liters... not really worth it unless you're prepping the engine and putting in high-comp pistons at the same time.
I know what you mean. I've ridden/driven cars much faster than mine, but I still want to keep that NA sound.
The Unichip is at Speedlab, Quezon Avenue. They do installation and dynotuning in-shop. If they're not familiar with the car, wiring the chip will take two or three days. But it's worth it. Speedlab is at Quezon Avenue... phone number: 376-4648
ATI can also give suggestions for build stuff... pistons and rods to use if you're working on the short block, etcetera... but remember, research on the engine thoroughly before committing. You can also try clubprotege.com and protegefaq.net for more info.
For parts, there are a bunch of guys on fordclub who can hook you up with suspension parts, intake parts and exhaust. For exhaust, I suggest you go custom, though... but take the deals on intake tubing (Simota... available... cheap) then fit it with a K&N. Watch the MAF placement, though... if the filter is too close to the MAF, you lose power as air turbulence plays havoc with the MAF.
Good luck!
Ang pagbalik ng comeback...
-
May 7th, 2008 05:18 AM #12
dollar/horsepoewer turbo is the way to go.Porting and polishing is a waste of money.
-
Tsikot Member Rank 3
- Join Date
- Oct 2006
- Posts
- 1,069
May 7th, 2008 07:56 AM #13You claim to be a "professional race driver" locally and internationally therefore you should know speed costs money right. A rebored 1.6l engine with mods might only be as fast as a stock 2.0l. A forced induced dohc 2.0l up engine will have the speed you are looking for.
-
Verified Tsikot Member
- Join Date
- Apr 2008
- Posts
- 22
April 29th, 2014 12:36 AM #14Lol stumbled on this thread again
* Si 06 I race professionally when I wrote this thread. I had FIA race licence with AAP for karting and race across Asia, along side with Marlon and Matteo.
As for my 1.6 ZM-DE. I was able to rebore to .50 along with handful tuning upgrades, few years back with the ATI guys!
I still drive this car and is now a track-car. Good times
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?