Ayaw matanggal spark plug

**s_quilicot** · March 26th, 2008 02:42 PM

Originally Posted by Bochekokik

Makahiram nga ng vacuum hehehe
1 year na nung nilagay current spark plugs, umaandar pa at wala namang problema. Gusto ko sanang i-check kaso ito na nga ayaw matanggal. Spark plug wrench din gamit ko pero hindi ko pinupuwersa at baka lalong magka problema.

bro i think you should consult a good mechanic na ..

**Bochekokik** · March 26th, 2008 02:51 PM

Try ko muna yung WD40 at counter pihit technique na advise ng mga kasama natin. Pag ayaw pa rin.... its time to call a friend na

**glenngj** · March 26th, 2008 02:54 PM

Originally Posted by s_quilicot

bro i think you should consult a good mechanic na ..

dalhin mo na lang sa talyer kung ayaw pa din matanggal.. yun ang magandang paraan.

**niky** · March 26th, 2008 03:06 PM

Originally Posted by Bochekokik

Try ko muna yung WD40 at counter pihit technique na advise ng mga kasama natin. Pag ayaw pa rin.... its time to call a friend na

Probably the best way, pare. I've had spark plugs stick before... you can take a small hammer and lightly tap it against the spark plug wrench to try and loosen it, also... tap, ha... not whack.

**JiggeR671** · March 26th, 2008 03:22 PM

sir, pag natanggal mo na yung plugs, lagyan mo ng anti-seize compund yung thread ng ikakabit mo na plug para nde na ulit ma stuck.

**Bochekokik** · March 26th, 2008 03:30 PM

Originally Posted by JiggeR671

sir, pag natanggal mo na yung plugs, lagyan mo ng anti-seize compund yung thread ng ikakabit mo na plug para nde na ulit ma stuck.

Bro, ano yung label nung anti-seize compound? San kaya ito available?

**enzo18** · March 26th, 2008 08:17 PM

tama pukpukin konti pero mahina lang. gamitan mo rin ng socket wrench.

**Bochekokik** · March 27th, 2008 10:18 AM

Ok na, natanggal na.

Konting babad sa WD40 overnight, then 1/4 pihit cw-ccw, so on and so forth, and then viola, tanggal na.

**s_quilicot** · March 27th, 2008 12:29 PM

Originally Posted by Bochekokik

Ok na, natanggal na.

Konting babad sa WD40 overnight, then 1/4 pihit cw-ccw, so on and so forth, and then viola, tanggal na.

congrats bro .. amzing job

haha

**mark_t** · March 27th, 2008 12:44 PM

Originally Posted by JiggeR671

sir, pag natanggal mo na yung plugs, lagyan mo ng anti-seize compund yung thread ng ikakabit mo na plug para nde na ulit ma stuck.

ako yon copper grease nilalagay ko, yon pang brakes. mga 2mm bead sa thread. ito rin nilalagay ko sa slide or any mating surface.

if you can find brake grease, a 20ml tube will last a very long time if you will just use it on threads and on your gun.