Bolt-on bi-xenon projectors

**IMm29** · August 16th, 2012 11:05 AM

Originally Posted by yourman_2nd

another thing i discovered sir, since china made yung projectors and bulbs, hindi maganda fit ng bulbs sa housing, you will notice maluwag sya kasi may space yung butas against the width of the bulb base (as compared siguro sa perfect fit ng oem prjectors or morimoto) kaya you also have to find try and move the bulb (slightly up or down) and see the best focus on the wall. yung sa akin, i needed to put a small metal screw under the bulb base against the projector opening kaya medyo naka "yuko" ng konti yung bulb at para snug fit sya sa projector. did this for borh sides. better focus of the light and di na sya umaalog.

Sounds similar to what my friend did on his Gen 5.

**flakez** · August 16th, 2012 05:36 PM

ah. sige. matignan nga yan. kaya naman to gawin without opening the housing? don lang sa may original na lagayan ng bulb sa likod ng housing?

thanks

**G01** · August 16th, 2012 06:14 PM

Bought a set of bi-xenon projectors during my visit to China. Installed them on my Strada's headlights.

**renzo_d10** · August 16th, 2012 07:00 PM

Output pics?

**G01** · August 16th, 2012 07:32 PM

Originally Posted by renzo_d10

Output pics?

Will post soon. Medyo maulan pa rin dito sa Baguio/Benguet. Hopefully starting tomorrow wala nang ulan so I can finally take pictures.

**Ginnova** · August 16th, 2012 11:10 PM

Originally Posted by flakez

nice. thanks. mukhang dahil basa nga lang yung kalsada kaya feeling ko mahina. hehehe. nung hindi umuulan ok naman siya. problem ko ngayon yung width niya sa kanan side. hindi maayos tulad nung sa kaliwa. ayusin ko pa alignment kasi hindi ko pa maayos yung horizontal alignment.

pansin ko lang nung isang beses parang may play yung ilaw? kita ko sa harapan ko na kumakalog yung ilaw kapag naka idle sa traffic yung sa right side. pero after a while nawala din naman...

actually yung reflector ang kumakalog. may konting play kasi yung mga mounts. kailangan lagyan ng sealant yun part na yan.

**yourman_2nd** · August 17th, 2012 12:40 PM

Originally Posted by flakez

ah. sige. matignan nga yan. kaya naman to gawin without opening the housing? don lang sa may original na lagayan ng bulb sa likod ng housing?

thanks

tama sir. dun sa base ng bulb at sa butas mismo ng projector.

**flakez** · August 17th, 2012 05:30 PM

Originally Posted by Ginnova

actually yung reflector ang kumakalog. may konting play kasi yung mga mounts. kailangan lagyan ng sealant yun part na yan.

naku kelangan pala buksan pag ganyan. hindi ko ata kaya yan. sabihin ko na lang don sa pinagbilan ko pag ganyan nga yung case.

Originally Posted by yourman_2nd

tama sir. dun sa base ng bulb at sa butas mismo ng projector.

ok. thanks. eto muna gawin ko, pag ganon pa rin yung suggestion na ni ginnova. pero as of now hindi na ulit siya kumakalog.

thanks!

**beefydog** · August 26th, 2012 04:59 PM

may tanong po ako,

ano po mas ok? yung koito q5 na 3.0 ba o yung morimoto mini h1?

also sa mga galing ng gen5, malaki po ba sobra difference at sobrang noticeable ba sya?

salamat po.

**IMm29** · August 26th, 2012 09:27 PM

Originally Posted by beefydog

may tanong po ako,

ano po mas ok? yung koito q5 na 3.0 ba o yung morimoto mini h1?

also sa mga galing ng gen5, malaki po ba sobra difference at sobrang noticeable ba sya?

salamat po.

Ang balita ko k ginnova, q5 > mh1. I have no first had experience on the q5, so i trust that to ginnova.

Another plus with the q5 is by virtue of the bulb - a d2s - there are more upgrade options available, like a philips bulb w different color options.

Vs a gen 5, mas malakas ang output ng mh1.