Bolt-on bi-xenon projectors

**beefydog** · April 2nd, 2011 11:28 PM

mga sir, yung demon eyes po ba walang effect sa buga mismo? yung sa friend ko kasing may red demon eyes yung buga nung 4300k nya medyo reddish. feel nya dahil sa red na demon eyes. based from experience nyo ba eh may effect sya? kasi pag sa picture parang yellowish naman. pag actual parang medyo reddish.

**Ginnova** · April 3rd, 2011 03:40 AM

Originally Posted by beefydog

mga sir, yung demon eyes po ba walang effect sa buga mismo? yung sa friend ko kasing may red demon eyes yung buga nung 4300k nya medyo reddish. feel nya dahil sa red na demon eyes. based from experience nyo ba eh may effect sya? kasi pag sa picture parang yellowish naman. pag actual parang medyo reddish.

dapat yung demon eye should turn off kapag naka-ON na yung headlight. may white wire sa controller ng demon eye na dapat ikabit to turn the demon eye OFF. pwede mapundi agad yung demon eye sa init ng main bulb kapag naka-ON ito while the main light is also turned ON.

**Ginnova** · April 3rd, 2011 04:00 AM

Originally Posted by fjoseph

GOOD DAY BOSS,

Anong HID fit para dito?? Dumatin at last yung order ko from L.A. Install ko nalang ng HID..

Are you referring to the bulb? anong klase ng projector ang nakakabit?

**zacks_888** · April 3rd, 2011 08:07 AM

Originally Posted by tucson88

tip lang sir pag kayo magkakabit: wag na wag nyo po hawakan ang hid bulb kasi tiyek magkakaproblema yun.

Originally Posted by Ginnova

dapat yung demon eye should turn off kapag naka-ON na yung headlight. may white wire sa controller ng demon eye na dapat ikabit to turn the demon eye OFF. pwede mapundi agad yung demon eye sa init ng main bulb kapag naka-ON ito while the main light is also turned ON.

Sir saan itatap yung white wire? dun ba sa wire ng HID?

. Confusfed

ako sa wiring regarding demon eyes. TY po

**Ginnova** · April 3rd, 2011 09:09 AM

pwede mo i-tap sa +12 supply ng ballast galing sa relay wire harness.

**Ginnova** · April 3rd, 2011 09:18 AM

Originally Posted by tucson88

tip lang sir pag kayo magkakabit: wag na wag nyo po hawakan ang hid bulb kasi tiyek magkakaproblema yun.

Originally Posted by zacks_888

Salamat sir sa info

. baka pakabit ko rin sa iba, kailangan pa kc tangalin ung bumper bago matangal ung HL. having second thought of installing it

. Hindi kc matangal ung HL ng 96 honda pag di tatangalin ung bumper

halos lahat ng mga modelong sasakyan kailangan tanggalin ang bumber para matanggal din ang headlight.

as for the bulbs, no worries kung mahawakan mo. I clean the bulbs with alcohol bago gamitin.

**Starex_Gold** · April 3rd, 2011 10:32 AM

AFAIK ang HID bulbs ok lang na mahawakan.

Ang halogen ang hindi pwede hawakan.

**fjoseph** · April 3rd, 2011 10:48 AM

Originally Posted by fjoseph

GOOD DAY BOSS,

Anong HID fit para dito?? Dumatin at last yung order ko from L.A. Install ko nalang ng HID..

*Sir Ginnova:Stock Halogen na H4 po yata nakakabit pa diyan. What color accent would you suggest that fits sa Kilay ng ilaw?? Puti Angel Eyes niya.

**Ginnova** · April 3rd, 2011 11:16 AM

Seems that the headlight is an aftermarket. What are you planning to install ba? ano bang sasakyan ito? x3/x5 ba.

**Ginnova** · April 3rd, 2011 09:43 PM

Some updates on my quad G5 set-up.

Installed another set of G5 on my fogs. ( Bi-Xenon Fogs ).
Medyo masikip pero was able to fit the projector with some cutting.

Modified the shield for a flat cut-off ( standard for fogs ). Output of 1 projector fog only.

Eto matagal ko na experiment. Prism shield. My 1st attempt. Look how colorful the cut-off. rainbow colors.

Cut-off at around 25ft. look how thick yung color ng cut-off.