Results 41 to 50 of 130
-
November 3rd, 2006 07:41 PM #41
By the way... basti08 said .7L (700cc) not 7L. He's comparing the highoutput 5.0 liter V8 of the E39 M5 and the regular Hemi V8 found in the Chrysler 300C.
by the way, the 300C's sibling the Dodge Charger has an optional Hemi on the R/T models that produces an extra 10hp from the same 5.7 liter Hemi engine.
Dodge Charger R/T Hemi
5.7 Liter V8 OHV
Max Power: 350hp * 5000rpm
Max Torque: 525Nm * 4000rpm
-
November 3rd, 2006 08:25 PM #42
Actually, most of today's clever designs were invented or thought out way back in the 1930's and during the war. It just wasn't practical to produce without some other technology back then that we have now i.e. metallurgy, computers, petrochemicals. Basically 1930's internal combustion technology is already very much "perfect".
Last edited by Alpha_One; November 3rd, 2006 at 08:27 PM.
-
November 3rd, 2006 09:45 PM #43
Support the uaw buy carp cars.....cobalt = ultimate car.
Edit No money = stuck with pushrod.... :fly:
-
November 4th, 2006 03:06 AM #44
Just a question to the people who say that the American V8 and all it's evolutions are low tech, have you even driven a car with a displacement of 5 liters and up? Once you have then I think you can make comparisons but until then all you are doing is speculating on it's performance based on data sheets not actual driving of the vehicles with these engines.
To say that GM will kill the 350 and it's cousins is crazy since they've just put variable valve timing on it. The engine is the most widely supported motor in the aftermarket industry. Heck you can even buy crate motors based on this design, AFAIK nobody makes crate motors for the B16, VG30, 2JZ, etc. You can take a block from a 70's 170hp version of the engine and put EFI or new carbs, change the heads, cams, and make the motor produce 400-500hp easy w/o superchargers or turbos. How many Japanese or Euro engines from the and 70's can you say that about?
Comparing the 0-60 times is pointless since the times are dependent on gearing in addition to the power.Comparison of the power output is also useless since most of the American engines mentioned are tuned on the conservative side and a simple retune can get lots more power. Comparing a highly tuned BMW V8 to a conservatively tuned Chrysler or Chevy engine isn't very fair.
-
November 4th, 2006 03:06 AM #45
*gasjunkie-The Cobalt uses a DOHC engine called a ECOTEC not a OHV engine. BTW in compact car drag racing that GM engine has been out performing the Honda's and Toyota's for the past 2 years.
Last edited by redorange; November 4th, 2006 at 03:11 AM.
-
November 4th, 2006 07:33 AM #46
GM's 350 cu in(5.7 liter) V8 has been replaced by the slightly larger 400hp 6.0 liter LS2 V8 on their production cars, the 350 is still available as a Crate Motor.
Some "not so big" but powerful OHV Crate Motors...
GM's OHV 350 cu in(5.7 liter) Gen III LS6 Crate Engine(from the C5 Corvette Z06)...
Max Power: 405 hp * 6000 rpm
Max Torque: 400 ft-lb(540 Nm) * 4800 rpm
Ford's OHV 302 cu in(5.0 liter) Crate Engine...
Max Power: 390 hp * 6200 rpm
Max Torque: 360 ft-lb(488 Nm) * 5000 rpm
Ford's OHV 351 cu in(5.8 liter) Crate Engine with Z Aluminum head...
Max Power: 410 hp * 5700 rpm
Max Torque: 417 ft-lb(565.5 Nm) * 4800 rpm
The 2006 Chrysler 300C SRT-8's 6.1 liter HEMI V8
Max Power: 425 hp * 6200 rpm
Max Torque: 420 ft-lb(569 Nm) * 4800 rpmLast edited by AG4; November 4th, 2006 at 08:25 AM.
-
-
November 4th, 2006 07:57 AM #48
-
Tsikot Member Rank 4
- Join Date
- Jun 2006
- Posts
- 1,046
November 4th, 2006 12:53 PM #49i think it's personal preference. gaya ng sinabi ni Basti08 whatever floats your boat.
-
November 4th, 2006 01:02 PM #50
Buhay na buhay ang BGC this evening. Bukas halos lahat ng restaurants. Sabi pa nung isang cashier...
Traffic!