Avanza DIY (Door Courtesy Switch)

[rcastro]

DIY ( Do It Yourself) Door Courtesy Switch - "For Door Alarm/ Door Light "

I wanna share my installation did on my avanzy para ito sa wala pang Door Courtesy Switch sa second door.

materials used

1. Door Courtesy Switch 2pcs
2. Soldering Iron / Lead
3. Automotive Wire # 18 - 1.5 meters/switch
4. Screw fine tread no.4
5. Strap / electrical tape


* picture below the door courtesy switch for (altis) after solder and put electrical tape.

[rcastro]

* remove sticker & insert switch.

[rcastro]

* remove side lining carpet cover, foot & Seatbelt plastic cover to fix properly of wire going to the first door switch.

[rcastro]

* disconnect connector on first switch and tap the wire , solder & put electrical tape.
* arrange wire by strapping or put electrical tape & tighten the screw door switch.
* returned all covers , ensure things are done complete.

Hi guys pasensya na di tayo marunong mga DIY hope makatulong.

[Eypeeyu]

* rcastro,

Great efforts, sir. Highly appreciated, especially to Avanza J owners like me.

[puroy]

lufet mo rcastro! ganyan yung procedure sa casa nung pinakabit ko yung courtesy switches ko. bravo! :D

[rcastro]

lufet mo rcastro! ganyan yung procedure sa casa nung pinakabit ko yung courtesy switches ko. bravo! :D

thanks Puroy & Eypeeyu! actually i dont have any idea kong anong procedure ang nasa casa . Kayo rin ang nagbigay ng idea sakin nito na Altis switch pwede sa avanza. additionally, pwedeng i tap rin dito yong negative ng (sound imobilizer) kong gusto ninyo na may " beep-beep" sound when you open the door.

[jaspi11]

galeng naman sirmore diy pa para matuto kami...

[jonn]

*rcastro sir mahilg ka din pala sa DIY... galing mo sir, Sayang hindi ko nakuhanan yun pagkabit ko ng roof rail, including yun pagbarena ng roof. sayang din ksi yun 400 bucks for labor eh, so far maganda naman kinalabasan.

[rcastro]

*rcastro sir mahilg ka din pala sa DIY... galing mo sir, Sayang hindi ko nakuhanan yun pagkabit ko ng roof rail, including yun pagbarena ng roof. sayang din ksi yun 400 bucks for labor eh, so far maganda naman kinalabasan.

ikaw narin ba ang nagkabit niyan? oo nga sayang din yong ibabayad kong madali lang namn

jaspi11 thanks!

Guys...ganito pala yong additional circuit for "sound immobilizer" connection na kinabit ko hindi ko na nakunan ng picture masyadong malakas yong siren circuit nakabit ko kaya isolated ko muna hanap ako ng iba yong tama lang na beeb beeb. so far post ko na rin para may idea kayo safe ito para alam mo kong may bukas pa na pinto.