san po ba maganda magpa undercoat?

**chieffy** · December 11th, 2002 06:51 PM

7k for undercoat :shock: ...mas mahal pa yata iyan sa discounted complete rustproofing ng Ziebart at sa pa-undercoat sa CASA ng 2k CRV...I don't know anything about factory undercoat pero kadalasan sa mga bagong kotse na nagpa-undercoat sa amin ay wala talagang extra layer of protection yung ilalim. Di kaya yung tinutukoy ng sales agent ay galvanizing of the body??? As far as I know, Opel pa lang yata ang most affordable car na fully galvanized. IMHO, pa-undercoat ka na lang sa pinakamalit na gas station pagkalabas ng pagkalabas mo ng CASA :wink: Yung remaining Php 5000, magaggamit mo pa sa ibang accessories :mrgreen: Enjoy your new ride :D

**prinsipe** · December 12th, 2002 11:13 AM

chieffy,

maraming salamat! sayang malayo yun gas station nyo sa akin.

mga pre,

may ma-recommend ba kayo na nag-undercoat na malapit sa cavite?

**[archie]** · February 26th, 2008 10:14 PM

medyo old thread na to pero gusto ko lang po sana malaman kung saan ok magpaundercoat ngyon. medyo may kalawang na kasi yung ilalim ng car ko (sayad sa mga humps). may iba pa po bang procedure (with the rusted parts) other than undercoating?

**pup2** · February 27th, 2008 06:46 PM

Question lang po. I have a stock Forester turbo na may cat sa ilalim. OK lang po ba ako magpa-undercoat? Di kaya delikado sa fire dahil sa turbo and/or cat? Mainit kasi yung cat at turbo eh.

Will it also lower road noise down the line?

Salamat po.

**Si 06** · February 27th, 2008 07:08 PM

Meron naman sigurong insulation sa high heat areas ang Subaru. Check nyo sir kasi mazdaspeed ko meron. Insulation ang kailangan for soundproofing pero baka makabawas din ang undercoating. Sarap naman pakinggan ang turbo pag nag spool

**yudyin** · May 17th, 2008 04:19 AM

sir chieffy gusto ko sanang magpa undercoat. im not sure if you're still in the biz. and im not sure where to go. kaso im also planning to have my car repainted before the year ends. ano ba maganda? repaint bago undercoat?

**yudyin** · May 17th, 2008 04:21 AM

nga pala mga bossing taga las pinas ako. kung meron sana kayong magandang lugar na marerecommend. pede din. (cefiro 97)

**karlbo** · May 17th, 2008 05:37 AM

as far as i know matagal na wala yung caltex ni chieffy..

sa amin caltex din 3M product din ang gamit for undercoat.

for me probably kahit anu naman mauna eh. paint muna tapos undercoat.. imo