New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 24 of 28 FirstFirst ... 14202122232425262728 LastLast
Results 231 to 240 of 273
  1. Join Date
    May 2006
    Posts
    7
    #231
    the application of the wurth sheets was very nice. I saw the job done on the old MB...very clean job...

    can't wait for my car to come out.

  2. #232
    Quote Originally Posted by smooth
    fyi: i had the same spray-on wurth sound deadening on the roof and doors. (the spray-on at the doors were applied to the outer door shell.) thereafter, jing also applied wurth sound deadening sheets onto the entire cabin floor and the inner door shell of all four doors. here's the thing, my sound system isn't exactly what many would like. its just one 4-ch amplifier driving both front satellites (quart) and both rear coaxes (ryan audio). i wanted the sound deadening for a quiet ride. the ride's pretty quiet (except for the stupid muffler - see my thread on workshop) but there's still some traffic noise getting into the cabin which i suspect is because of the lack of sound deadening from the glass. but on the expressway, the ride's really quiet which is really really good. (but i have got to really find a really nice and quiet muffler.)
    Nice, how much did it cost? labor + materials. Am planning to have my front door deadened, my primary purpose is to lessen the vibrations of the panels when the midbass hits. lets see what happens

  3. Join Date
    May 2006
    Posts
    7
    #233
    [QUOTE=ILuvDetailing. Am planning to have my front door deadened, my primary purpose is to lessen the vibrations of the panels when the midbass hits. lets see what happens[/QUOTE]

    deaden teh doorskins as well.

  4. Join Date
    Oct 2003
    Posts
    699
    #234
    Quote Originally Posted by ILuvDetailing
    Nice, how much did it cost? labor + materials. Am planning to have my front door deadened, my primary purpose is to lessen the vibrations of the panels when the midbass hits. lets see what happens
    the wurth sheets go for about 3K per pack of 6 sheets (can't remember exact price at the moment). you're going to need just 1 pack per 2 doors (4 doors will need 2 packs). the flooring will need about 2 packs (actually around 1 1/2 packs lang ang flooring kaya alangan sa isang pack). its going to have a really big impact if you've got a great sound system. also helps in drowning out the road noise. also, it somehow helps the a/c system since the thing is basically made of asbestos.

    the dark brown W123 with all the sound deadening looks like its a show car. incredible.

  5. Join Date
    Jul 2006
    Posts
    1,743
    #235
    guys here is the website of nonos bodyworx.


    www.nonos-bodyworx.tk


    visit nyo na lang.

  6. Join Date
    May 2004
    Posts
    198
    #236
    mga sir meron po ba kayo address at landline ng zinggoy

  7. Join Date
    Oct 2002
    Posts
    13,415
    #237
    I don't think asbestos based ang Wurth, pretty much wala nang insulation products na consumer item ang gawa sa asbestos in Europe and US.

    Yung Benz kay Tippee of MBCP yun, sangdamukal ang W123 nun hehe.

  8. Join Date
    Oct 2002
    Posts
    647
    #238
    Any feedbacks kay Lex Altuna sa tapat ng Christ the King and Clifford?

  9. Join Date
    Aug 2004
    Posts
    243
    #239
    After looking around for budget but good hilamos, i have tried the car shop along quirino ave. for revo unit.

    the hood is scrape to metal kc meron cracked sya

    the amount is reasonable like 16k for nippon nax paint kasama interior and engine bay kc change color eh.

    for those that are interested PM me. the owner is also subcontractor sa mga dealer.

    the unit will be ready by end of week of will post sample pic.

  10. Join Date
    Sep 2005
    Posts
    1,455
    #240
    sir, you've got pm.

    Quote Originally Posted by katsudon_ph View Post
    After looking around for budget but good hilamos, i have tried the car shop along quirino ave. for revo unit.

    the hood is scrape to metal kc meron cracked sya

    the amount is reasonable like 16k for nippon nax paint kasama interior and engine bay kc change color eh.

    for those that are interested PM me. the owner is also subcontractor sa mga dealer.

    the unit will be ready by end of week of will post sample pic.

San Magandang Magpahilamos ng Paint?