How often you wax your car

[scharnhorst]

sir ,
about this step po, kasi eto rin ginawa ko kaso medyo me doubt ko about how its done e so pls advise naman po ,

wash
Nanoglos then buff agad?wait for how many hours before applying 476?
after applying the 476 then buff agad ? wait po ng ilang oras bago apply yun Nanosliq?

tsaka sir if you say just wash every week , it means use shampoo uli di ba?(hindi po ba matatangal yung 476 ko pag ganito?)then finish off lang ng Nanosliq or any QD?


salamat po uli

sir threx666:

1) yup. wash, then nanoglos, then buff immediately
2) wait 8 hours before applying 476. buff immediately per panel (just use the finger-technique I described) - dried 476 is a PITA to remove. hehe
3) wait at least 6 hours before applying nanosliq
4) 476 won't be stripped by car shampoos (at least not by microtex or megs or moms car shampoo)
5) yup, it's preferred to use a booster QD such as nanosliq or mom's FX spray wax (or kung may pera ka, a true blue liquid wax such as OCW) after every wash

[threx666]

ayos sir scarnhorst

nadale mo yung mga tanong ko hahaha at least crystal clear yung pagkakaintindi ko ,medyo slow learner yata ko ngayon ah

sir dapat moist yun mga applicators ng glos at sliq di ba?yun kasi gamit ko na style sa mga wax e and dapat me sariling applicator din for every product di ba?me extra pa kasi ko na applicator na 4 for 89petot na kulay dilaw e , sayang naman pag di nagamit

tsaka after nanosliq no need na to buff?

maraming salamat po sir and God Bless

[scharnhorst]

ayos sir scarnhorst

nadale mo yung mga tanong ko hahaha at least crystal clear yung pagkakaintindi ko ,medyo slow learner yata ko ngayon ah

sir dapat moist yun mga applicators ng glos at sliq di ba?yun kasi gamit ko na style sa mga wax e and dapat me sariling applicator din for every product di ba?me extra pa kasi ko na applicator na 4 for 89petot na kulay dilaw e , sayang naman pag di nagamit

tsaka after nanosliq no need na to buff?

maraming salamat po sir and God Bless

no problem sir!

1) for glos kahit hindi moist... pero lagyan mo ng product (kumbaga puhunan) yung applicator before using it

2) for sliq, you can opt to spray the applicator with sliq. you can use a MF cloth to apply nanosliq

3) yup, for every product, use a different applicator. those yellow foam pads work well - ginagamit ko rin yan

4) kelangan i buff ang nanosliq, kung hindi medyo blurred sya at puro streaking

hope that helps!

[pogy_uy]

Thanks for the tips guyz!

[tradewind26]

Optimum Car Wax - Hands down, the easiest wax to apply. Spray on, with no need for buffing.

Question ko about this. So pag inapply ko OCW, no need punasan ng microtex. So spray lang ayos na?

[umi001]

Question ko about this. So pag inapply ko OCW, no need punasan ng microtex. So spray lang ayos na?

You will need to spread it evenly using an MF towel. After that, nothing else to do - no need to buff off.

[spyker]

Once a month.

[dondonposadas]

Question lang mga sir, ano pinaka safe na wax na clear coat friendly?

[ronki]

Question lang mga sir, ano pinaka safe na wax na clear coat friendly?

As long as it has no abrasives, they are clear coat safe.

[monty_GTV]

Question lang mga sir, ano pinaka safe na wax na clear coat friendly?

check the labels of the wax container, madalas naka-indicate kung "clear coat safe"...